To display this page you need a browser with JavaScript support.Surface Aerator, Description - Paramount Limited




EPC, Water Waste Water Treatment, Paramount
    >> Pollution Control Equipments >> Surface Aerator >> Description
 
   

Surface Aerator
Description

"PARAMOUNT" make Surface Aerator is of fixed mechanical type having slow speed. The oxygen transfer capacity of the unit shall range from 1.9 kg/kw/hr to 2.1 kg/kw/hr and the minimum ripple velocity at the farthest point would be 0.3 m/sec. The dissipation power will cause the hole mass to reaming in the homogeneous condition our range of manufacturing covers 3.0 HP, 5 HP, 10 HP, 12.5 HP, 15 HP, 20 HP, 25 HP, 30 HP, 40 HP, 50 HP,75 HP and 100 HP fixed type surface aerators.

Paramount-make surface aerator comprises of :-


Impeller :
The Aerator Impeller is provided with radial self cleaning blades, design to give optimum oxygen transfer in to liquid. The turbulance created by the impeller is sufficient to keep the sludge in suspension at the farthest point.

The impeller is M.S. Construction with tubular shaft design for required torsional capacity. The wetted parts is suitable for withstanding The corrosive action of the liquid.

The important aspect of the design of the impeller is a self-cleaning built in feature, which requires absolutely no maintenance of the impeller, since no range and other solids can gets caught within the Impeller vanes. The impeller is balanced statically.

TUBULAR SHAFT :
Is of M.S. PIPE (Heavy duty) having concentrically machined flanges to connect gear box and motor assembly through rigid heavy-duty coupling.

DRIVE UNIT :
The aerator is driven by motor of suitable rating. The speed is reduced from the motor speed to the aerator speed by a suitable reduction gear box. Having worm/helical gears, the speed of the aerator and the diameter of impeller are so selected that aerator will have the optimum oxygen transfer capacity of 2.0 KG/KW/HR. The motor is of reputed make suitable of outdoor duties. The reducer bearings and gears are oil lubricated and weather protected.

ADJUSTING STUDS :
The depth of submergence can be adjusted by the adjusting studs. It is necessary to maintain the water level to avoid overloading of aerator drive.

PAINTING : The bottom cone is shot blasted.


Surface Aerator

 
 
   
 
   
 
   
 
   
Consultancy Services, Waste Water Treatment, Water Treatment, Sewage Treatment,  Deminerialised Water Treatment,
Air Pollution Control, Flue Gas Desulphurisation, Hazardous Waste Incinerators, Pollution Control Equipments,  
Contact Us,
 Site Map
 
   
 
   
Copyright © Paramount Limited., All rights reserved Paramont Limited, Vadodara, India